Welcome to Würth Aerospace Solutions For trade customers only

ABS Lock III B

Anchor point ABS Lck III concr. flat roof stick-on
LOCK3 CONCRETE(L3-B-100-80)CEMENT100MM

Art.-no. 0838904002
EAN 4050642915060

Prices for customers after login
ABS Lock III B

Art.-no. 0838904002

Prices for customers after login
Quantity
PU
x 1 pcs

Exclusively for trade customers

Register now and access more than 125,000 products

Anchor point for bonding in concrete surfaces

The ABS-Lock III-B stainless steel securing device is a real all-rounder: It has been tested under load in every direction and can therefore be mounted in the floor, on the wall, on a façade or overhead without issue. The general technical approval (abZ - allgemeine bauaufsichtliche Zulassung) from the German Institute for Construction Technology (DIBt - Deutsches Institut für Bautechnik) means you are connecting the securing device/anchor point permanently to the building.



The ABS-Lock III-B can be used to set up various holding and catching systems. It can be used as a single anchor point or as a support (wall/façade) in safety harness systems. The 16-mm thick ABS-Lock III-B bends in the case of a fall, to reduce the force on the substrate to which it is mounted. To ensure that the support does not bend prematurely due to necessary pre-tension when used in safety harness systems, an optionally available support tube provides the necessary strength.

NoticeCaution: A support tube is required for use in safety harness systems on walls/façades (corner support or end clamp) with an overhang ≥ 100 mm
Product information

Datasheets(X)

Certificates/ Documents

 | 

 | 

Application area

For concrete for cementing into the ceiling or wall.

InstructionsThe DIBt-approved stainless steel anchor point (dia. 16 mm) for persons is secured in concrete with two-component mortar WIT-UH-300.

Material

Stainless steel

Rod length

100 mm

Diameter

16 mm

EN standard

795

Suitable for use in the following materials

Concrete

Type description

L3-B-100-80

Height

100 mm

Colour

Stainless steel coloured

Surface

Stainless steel FINISH

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information