ABS Lock III H
Anchor point ABS Lock III, wood
LOCK-III-WOOD-(L3-H-100)-100MM
Register now and access more than 125,000 products
After installation, the anchoring system will then secure up to 3 people against falling - as a holding system or a catching system on your flat roof.
The ABS-Lock III-H fall arrester is made entirely of corrosion-resistant stainless steel and suitable for transverse loads. You can also use the attachment point as an intermediate support for safety harness systems on wooden substrates.
Like all products from ABS Safety, the ABS-Lock III-H is weather-resistant and marked with all of the relevant data.
Datasheets(X)
For load-bearing wooden constructions
Joist min. 80 mm x 120 mm + formwork min. 18 mm
It could hardly be simpler: To install the ABS-Lock III-H, simply drill a hole. Then screw the lower thread of the attachment point directly into the rafter.
Material | Stainless steel |
Rod length | 100 mm |
EN standard | 795 |
Suitable for use in the following materials | Wood |
Type description | L3-H-100 |
Height | 100 mm |
Colour | Stainless steel coloured |
Surface | Stainless steel FINISH |
Last viewed
Safety sandals S1
Plastic screw combination EUROFAST® TWPB-8040
Hexagon head bolt with shank for pressure container construction (PED) ISO 4014, steel 25CrMo4, zinc-plated
Steel spacer stud
Low-cut safety shoes, S2
Cut-resistant glove Ansell Edge 48-707
Circlip For shafts, standard design, shape A DIN 471, spring steel, phosphated and oiled
Hexagon socket set screw with ring cutter ISO 4029, steel, 45H, plain
Cut-resistant glove Ansell Edge 48-707
K Plus insulation pipe clamp With separate insulation part