ABS Lock III HW
Anchor point ABS Lock III HW
LOCK-III-WOOD-(L3-HW-400-300)-BY-SCREW
Register now and access more than 125,000 products
When secured through a load-bearing beam, the ABS-Lock III-HW securing device is prepared for load in any direction:
- Mounted on the floor or overhead
- Axial and transverse load
- Single anchor point
- System support in safety harness systems
When attached to wooden substrates, the fall arrester solution provides simultaneous anchoring support for up to 3 people.
- The stainless steel anchor point has a post diameter of 16 mm
With or without projection
Datasheets(X)
- for load-bearing wooden constructions
- Beam min. 100 mm x 120 mm
- incl. fastening material
After pre-drilling, it is screwed through the beam and secured with a nut. The required fastening material is included.
Material | Stainless steel |
Rod length | 400 mm |
EN standard | 795 |
Suitable for use in the following materials | Wood |
Type description | L3-HW-400-300 |
Height | 400 mm |
Colour | Stainless steel coloured |
Surface | Stainless steel FINISH |
Last viewed
Protective glove Ansell Ringers R163
Hexagonal bolt with shank
Work jacket
HSS Performance die For standard metric ISO thread
GEFU® thread-rolling screw With Taptite 2000® thread, flat head and hexalobular drive
Sanding disc cloth-backed Klingspor QRC 412
Dry abrasive paper roll wood KP perfect KP perfect
Polyester coils, 5.3 mm, wound 3-way twisted with Powerglider
Low-cut safety shoes, S1
Protective glove, chemicals