ABS Lock III R ST, to screw in
Anchor point ABS Lock III, steel, R, to screw in
LOCK-III-ROTATING-STE-(L3-ST-0-30-R-M20)
Art.-no. 0838904126
EAN 4053479382319
Register now and access more than 125,000 products
ABS-Lock III-R Steel is a high-quality anchor point with a freely rotating anchor eyelet. This allows you to easily move around the anchor point when working. ABS-Lock III-R for steel substrates significantly reduces the risk of a twisted lanyard or jammed carabiner. This fall arrester really shows its strengths when working in areas where space is limited, such as wind turbines or industrial machines.
The anchor point can withstand loads in all directions and secures up to two people when working on wind turbines (in accordance with EN 50308). In other fields of work, the system has been tested in accordance with DIN CEN/TS 16415:2013 for simultaneous use by three people.
GL-certified. Freely rotating lifting ring. Not suitable for repeated lowering during overhead use.
Datasheets(X)
The anchoring system is supplied in yellow (RAL 1003) as standard. This not only ensures good visibility, but is also a requirement on wind turbines.
It is certified for use on wind turbines. However, the system can also be used in any other field of work that has a load-bearing steel substructure.
The ABS-Lock III-R for steel is screwed into an existing thread on site.
Material | Stainless steel |
EN standard | 795 |
Suitable for use in the following materials | Steel |
Type description | L3-ST-0-30-R-M20 |
Height | 0 mm |
Colour | Signal yellow RAL 1003 |
Surface | Stainless steel FINISH |