ABS Lock III R ST, to tighten
LOCK-III-ROTATING-STE-(L3-ST-0-50-R-M16)
Art.-no. 0838904127
EAN 4053479382326
Register now and access more than 125,000 products
With a 360° rotating lifting ring, the ABS Lock III-R for tightening offers the best possible freedom of movement. It is suitable for use in extremely restrictive working environments, such as wind turbines, large machinery, maintenance hangers or in industrial manufacturing. In addition to the required certification in accordance with DIN EN 795, the anchoring system has been tested for use on wind turbines in accordance with EN 50308.
Its yellow colour (RAL 1003) ensures the fall arrester cannot be overlooked. If you are not using the ABS Lock III-R on a wind turbine, we will also supply you with an anchor point in other colours upon request. Please feel free to contact us.
GL-certified. Freely rotating lifting ring. Includes fastening material. Not suitable for repeated lowering during overhead use.
Datasheets(X)
The fall arrester can withstand loads in all directions and secures up to three people simultaneously working at height (max. 2 people on wind turbines in accordance with EN 50308).
The ABS Lock III-R for tightening is to be attached to steel substrate with a thickness of at least 6 mm.
Material | Stainless steel |
EN standard | 795 |
Suitable for use in the following materials | Steel |
Type description | L3-ST-0-50-R-M16 |
Height | 0 mm |
Colour | Signal yellow, similar to RAL 1003 |
Surface | Stainless steel FINISH |
Last viewed
Profile half cylinder EPS
Tapered pin, unhardened DIN 1 unhardened A4 stainless steel plain
Screw, hexagon head with shaft ISO 4014, 10.9 steel with silver zinc-flake coating (ZFSHR)
QUATTRO paint spray
Shim ring DIN 988, steel, plain
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 10.9, plain
Pipe fastening clamp DIN 3016, shape D, A2 stainless steel, EPDM, BASIC-Line
Wire cup brush Steel, crimped, with shank
Bolt with head ISO 2341, type A, plain steel
Safety boots, S3 Steitz Oslo Bau Gore II