ABS Lock III ST
Anchor point ABS Lock III, steel
LOCK-III-STEELL-(L3-ST-100-45)-100MM
Register now and access more than 125,000 products
The centrepiece of the ABS-Lock III-ST anchor is a 16-m thick stainless steel support. The securing device can be loaded in any direction, secures up to 3 people when working at height and can also be supplied without projection on request.
Would you like to use the anchor point as a component in a safety harness system? No problem! ABS-Lock III-ST is suitable as an intermediate holder, but can also be equipped with a support tube to function as a curve or corner support.
With or without projection. Incl. fastening material. With support tube as end and corner post in rope systems.
Datasheets(X)
The anchor point has been developed for installation on load-bearing steel substrates. It secures your employees in industrial halls, on crane runways and roofs.
The thread of the anchor point is simply inserted through a suitable hole and then secured with a jam nut (supplied).
Material | Stainless steel |
Rod length | 100 mm |
EN standard | 795 |
Suitable for use in the following materials | Steel |
Type description | L3-ST-100-45 |
Height | 100 mm |
Colour | Stainless steel coloured |
Surface | Stainless steel FINISH |
Last viewed
Hexagon nut, inch
Hexagonal bolt with shank
Low-cut safety shoes S1 Steitz CP 4100 ESD
Work vest
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 12.9, plain
Work shirt
Diamond dry core drill bit Klingspor DR 912 B Special
Helical insert W.TEC® INSERT COIL Free Running fine thread
Pan head tapping screw with flange
Straight weld fitting ISO 8434-1, stainless steel 1.4571