ABS Lock III Seitl 65
Anchor point ABS Lock III side 65
LOCK-III-LATERALLY-(L3-SEITL-400-65)-400
Register now and access more than 125,000 products
When screwed through the rafter with 2 stainless steel screws, the ABS-Lock III-Seitl-65 fall arrester protects against falls. The stainless steel securing device has an angle plate for lateral installation and has been tested for simultaneous use by 3 people.
The anchoring device has been tested under load in all directions, meaning it can be mounted overhead without issue. The ABS-Lock III-Seitl-65 (in combination with an additional support tube) is therefore best suited for use in rope harness systems.
With support tube as end and corner posts in safety harness systems.
Datasheets(X)
- Secured laterally with angle plate
- Variable mounting through 2-hole attachment
- For load-bearing wooden constructions
- Beam min. 120 mm x 100 mm
The ABS-Lock III-SEITL-65 angle plate has 2 holes, through which the 16-mm thick support can be installed at variable distances to the mounting surface.
Material | Stainless steel |
Rod length | 400 mm |
EN standard | 795 |
Suitable for use in the following materials | Concrete |
Type description | L3-SEITL-400-65 |
Height | 400 mm |
Colour | Stainless steel coloured |
Surface | Stainless steel FINISH |
Last viewed
Snap ring shape SB for drill hole
Twist drill bit HSCo DIN 338 Type RN MFD VARIO
Stud screw A2 stainless steel
ISO 8734 stainless steel C1 tolerance class m6
High-visibility jacket
EPS profile thumbturn cylinder
Universal protector GPN 600 Polyethylene, natural
Key, high profile DIN 6885, stainless steel 1.4571, shape A
Hexagonal bolt with shank for pressure container construction ISO 4014, steel 5.6, zinc-plated, blue passivated (A2K)
Twist drill bit HSCo DIN 338 type RN oxide