ABS Lock III support tube
Supporting tube for ABS Lock III
SPRTTUB-(LOCK-III)-(L3-STUETZROHR-400)
Register now and access more than 125,000 products
The ABS Lock III support tube helps you to reinforce suitable securing equipment from ABS Safety for use in safety harness systems of type ABS Lock SYS I-IV. This is particularly necessary for corners and curves and with end fasteners: Pretensioning of the stainless steel cable required for a cord guard may otherwise result in unintentional deformation of the supports. With the additional support tube, however, this is not a problem! Many of our anchor points come equipped with a permanently welded support tube specially for use in rope systems. The ABS Lock III support tube can be used to subsequently reinforce simple stainless steel supports.
Most personnel anchor points from ABS Safety are suitable for use in safety harness systems, many others allow upgrading with a support tube.
Datasheets(X)
- Support tube for supports 16 mm in diameter
- For use as corner and end posts in rope systems
- including force absorber
Available in different lengths: The high-quality ABS Lock III support tube is used to reinforce securing equipment and system supports.
Material | Stainless steel |
Rod length | 400 mm |
EN standard | 795 |
Suitable for use in the following materials | Concrete |
Type description | L3-STUETZROHR-400 |
Height | 400 mm |
Colour | Stainless steel coloured |
Surface | Stainless steel FINISH |
Last viewed
Hexagonal bolt with thread up to the head ISO 4017, steel 10.9, zinc-plated, blue passivated (A2K)
Hexagonal bolt with shank DIN 931, steel 8.8, zinc-plated, blue passivated (A2K)
Cutting mat Martor
Hexagon socket set screw with pin ISO 4028, A2 stainless steel, 21H, plain
Safety boots, S3
Plastic frame anchor W-UR 10 XS W-UR 10 XS for use in perforated brick with small chambers and thin webs in conjunction with the AMO Combi screw
Stretch X overall
Defibrillator AED Plus®
Paint tray
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 12.9, plain