ABS Lock T for steel girders
ANCPT-ABS-(LOCK-T)-STEELBEAM
Art.-no. 0838904197
EAN 4260336782759
Register now and access more than 125,000 products
Easy to install and almost indestructible. The ABS-Lock T anchor point is clamped on the flange of your steel girder using the clamps and can then be used as a lifeline system. ABS-Lock T is a single anchor point for up to three people, can be loaded in any direction and can also be used as a system component in a lifeline system - as an intermediate post, curve or end fastener.
Datasheets(X)
- DIN EN 795:2012, B and DIN CEN/TS 16415:2013
- Easy, secure clamping on steel girders
- Flange width 80 mm to 320 mm
- Flange thickness 8 mm to 16 mm
The stainless steel anchor point is removable and has been tested as an anchor system in accordance with DIN EN 795 type B and DIN CEN/TS 16415:2013. The clamping mechanism allows the lifeline system to be installed without penetrating the building structure. The anchor system is made from plastic-deformable stainless steel and the clamps are made from hot-dip galvanised steel.
The clamps in the anchor system can be steplessly adjusted to fit flange widths up to 320 mm (thickness 8 mm to 16 mm).
EN standard | 795 |
Material | Steel |
Weight | 2230 g |
