ABS-Lock X Sandwich Metal roofing anchoring point

The ABS-Lock X-SW anchor point provides you with a fall arrestor for sandwich roofs that is simple to install from above. To do so, you simply drill four holes, remove some of the insulation underneath the roof layer with a screwdriver or similar, and insert the gravity toggles. To install the anchor point, the sandwich profile (steel) must have a minimum thickness of 0.5 mm.

The single anchor point is designed for lateral loading when installed properly. Up to three roof workers can be attached to the anchor eyelet at any one time. With almost no alteration, the ABS-Lock X for sandwich profiles can also be used as a simple intermediate anchor post in our non-traversable lifeline systems. Would you also like to use the anchor point with curved elements and end posts? Then simply strengthen the anchoring setup with the Lock X anchor post, available separately