ABS Lock X Sandwich Metal roofing anchoring point
Anchor point ABS Lock X Sandwich
LOCKX SANDWICH(LX-SW-300) 300 MM
Register now and access more than 125,000 products
The anchor point ABS-Lock X-SW provides you with a fall arrester for sandwich roofs which is simple to mount from the top. To do so, you simply drill 4 holes, remove some of the insulation underneath the roof layer with a screwdriver or similar, and insert the toggle fixings. To mount the anchor point, the sandwich profile (steel) must have a minimum thickness of 0.5 mm.
The single anchor point is designed for a lateral load when installed properly. Up to 3 roof workers can be attached to the anchor ring at any one time. With almost no alteration, the ABS-Lock X for sandwich profiles can also be used as a simple intermediate support in our non-traversable rope harness systems. Would you also like to use the anchor point with curved elements and end posts? Then simply strengthen the anchoring setup with the Lock X support tube, available separately
- Hole distance 280-333 mm
- Includes fastening material
- With supporting tube as end and corner post in rope systems
Datasheets(X)
- Sandwich and trapezoidal sheet roofs (negative)
- Steel above 0.5 mm
ABS-Lock X-SW anchor points for sandwich panels are mounted using 4 spring toggles inserted from above directly into the sandwich sheet. The insulated foam is hollowed out in the vicinity of the spring toggles. For bead spacings of 280-333mm. Anchor points of type ABS-Lock X-T should be used for shorter distances.
Material | Stainless steel |
Rod length | 300 mm |
EN standard | 795 |
Suitable for use in the following materials | Metal trapezoidal plate, Sandwich profile |
Type description | LX-SW-300 |
Height | 300 mm |
Colour | Stainless steel coloured |
Surface | Stainless steel FINISH |
Last viewed
Open-end plug-in torque wrench head drive Stahlwille 731/100
Clamping pin/clamping sleeve, slotted, heavy-duty design ISO 8752 spring steel plain
MFD-S multi-purpose drill bit with straight shank
Weatherproof trousers
Work trousers
Angled washer 45° A2 oval hole
Castellated nut, low profile DIN 979, steel 05, plain
WÜPLAST® pan head screw with hexalobular drive WN 1452, steel 10.9, zinc-nickel-plated, transparent passivated (P3E)
Hexagonal bolt with flange in accordance with MBN standard
Spherical roller bearing