ABS-Lock X T
LOCKX TRAPEZOIDAL SHEET(LX-T-500) 500 MM
Art.-no. 0838904027
EAN 4260336784203
Register now and access more than 125,000 products
The stainless steel anchor point with plastic-deformable post (16 mm diameter) has DIBt national technical approval and the appropriate conformity mark.
The anchorage system is designed for obversely and reversely laid box-profile roofing sheets.
It can be used as a single anchor point as well as a bracket for lifeline components.
The safety solution is fastened with 4 gravity toggles, which are included.
The anchor point has been tested for transverse loads and secures 3 of your employees against falling from a roof.
Datasheets(X)
The anchorage system is designed for obversely and reversely laid box-profile roofing sheets. It can be used as a single anchor point as well as a bracket for lifeline components.
- DIBt national technical approval no. Z-14.9-688 Ü-number
- DIN EN 795:2012, A + DIN CEN/TS 16415:2013
- Box-profile roofing sheet (obverse/reverse), steel above 0.63 mm
- Non-insulated roofs, hole spacing 180 to 250 mm
- includes fastening materials
- with anchor post as end and corner post in lifeline systems
Material | Stainless steel |
Rod length | 500 mm |
Diameter | 16 mm |
EN standard | 795 |
Suitable for use in the following materials | Metal trapezoidal plate |
Type description | LX-T-500 |
Height | 500 mm |
Colour | Stainless steel coloured |
Surface | Stainless steel FINISH |
Last viewed
EPS profile thumbturn cylinder
Twist drill bit HSCo DIN 1869 R2 type RN
Shutter hinge
Profile half cylinder EPS
Flat washer without chamfer ISO 7089 steel 200 HV, zinc-nickel silver (ZNSH)
Machine tap HSCo, green ring, through hole DIN 371/376
TRIATHLON Cargo Ultra engine oil 5W-30
Slotted cheese head DIN 84, zinc plated 4.8 steel with thick-layer passivation (VZD)
U-holder
Washer and nut WN-810 steel plain