ABS Thermal protection cover
ABS thermos protection sleeve
THERMPROTSLEV-(ZU-1009-F)-FLHD-70MM-D16
Register now and access more than 125,000 products
The plastic ABS Therm thermal protection cover (330 mm high) is simply placed over our single anchor points to prevent the formation of thermal bridges. The protection cover is used above the roof membrane. The high-quality plastic material is UV resistant and weather resistant.
Datasheets(X)
- For anchor points, fall arrest systems (dia. 16 + 24 mm) or systems with a support tube (dia. 42 mm)
- 330 mm height
- Can be individually shortened on site to the desired length
- Assembly above the roof membrane
Simply trim thermal protection covers to the appropriate length on-site; they are not sealed in. In this way, you can cut the cover to fit your single anchor points perfectly.
Product weight (per item) | 238 g |
Material | Plastic |
Diameter | 16 mm |
Last viewed
Release tool
Vehicle battery charger Profi Mazda 35 A
Wheel/tyre tag loops
ASSY® 4 CSMP universal screw Steel zinc plated partial thread countersunk milling pocket head
Hexagonal bolt with shank and fine thread DIN 960, steel, strength class 10.9, zinc-nickel-plated, transparent passivated (P3E)
E 6.3 PH bit (1/4 inch)
Scraper handle
Connector, pneumatic
Low-cut safety shoes, S2
Chipboard base For pallet shelves