ABS anchor point Lock SD
LOCK-STEEP-ROOF-SUPPORT-(L-SD-300)-300MM
Art.-no. 0838904196
EAN 4260336782735
Register now and access more than 125,000 products
The ABS-Lock SD stainless steel anchor point for wooden rafters is screwed onto two rafters by means of a cross brace. The cross brace enables stepless alignment of the anchor point to any pitched roof angle. The post in the anchorage system is reinforced with an anchor post (dia. 42 mm) as standard, making it suitable for use as a component in a lifeline system.
When used as a single anchor point, the system can be used to secure three people at the same time. The system is fastened using the four supplied stainless steel screws.
Includes fastening material
Datasheets(X)
- DIN EN 795:2012, A + DIN CEN/TS 16415:2013
- For load-bearing timber structures
- Rafters min. 60 mm x 120 mm
- Installation angle and installation position can be selected freely
Material | Stainless steel |
Rod length | 300 mm |
EN standard | 795 |
Suitable for use in the following materials | Wood |
Type description | L-SD-300 |
Height | 300 mm |
Surface | Stainless steel FINISH |
Last viewed
EU+ HSCo 90° TiAIN countersink DIN 335 C
PRIPRESS ® angled transition with male thread
Stud with head, shape B ISO 2341, type B, zinc plated with thick-layer passivation (ZSM)
FLEXEN® heating rubber plus 2 m hose, self-adhesive
Centre-grooved dowel pins ISO 8742 steel zinc-plated
Safety shoe S1
Round head screw with square neck and nut DIN 603, steel 4.8, plain, with nut
Telescopic extension rod With safety device
Countersunk head screw with hexagon socket ISO 10642, A2-070 stainless steel, plain
Tubular rivet shape A DIN 7340, nickel-plated brass, shape A