ABS anchor point Lock X Solar
LOCKX SOLAR(LX-SOLAR-150) 150 MM
Art.-no. 0838904045
EAN 4260336783367
Register now and access more than 125,000 products
Simply clamped around the girders of your solar thermal and PV modules, the ABS-Lock X-Solar offers an anchor point for 3 people. The anchor point can be used as a single anchor point or can be extended to form a lifeline system.
The stainless steel anchor point has a deformable post (diameter 16 mm), which significantly reduces the application of force in the event of a fall. Before installing the ABS-Lock X-Solar anchor point, however, it is important to test the system's girders for their load capacity.
The anchor point is clamped directly around the girder of the PV system with its base plate and counter plate (100 mm x 100 mm). The ABS-Lock X-Solar can be loaded in all directions and is therefore ideally suited for use on pitched roofs.
Datasheets(X)
- DIN EN 795:2012, A + DIN CEN/TS 16415:2017
- For PV system and solar thermal system girders
- Profiles up to 50 mm x 50 mm
- Substructure must be tested for load capacity!
- Incl. fastening material
- With anchor post as end and corner post in lifeline systems
This stainless steel anchor point (diameter 16 mm) is specially designed for working on solar thermal and PV modules. You simply clamp the anchor point with the base plate and counter plate (100 mm x 100 mm) around the suitable supporting girders of the photovoltaic system.
Material | Stainless steel |
Rod length | 150 mm |
EN standard | 795 |
Type description | LX-SOLAR-150 |
Height | 150 mm |
Colour | Stainless steel coloured |
Surface | Stainless steel FINISH |
Last viewed
Bevelled-edge chisel
AT 48 automatic door seal
Screw, hexagon head, inch ASME B18.2.1, steel GR5, hot-dip galvanised
Rotatable drop-in anchor for installing plastic windows in the reveal
Lamella flap disc Flexi-Disc
Customer service bucket
Würth Flex 400 current transformer
SMP adhesive sealant XTREME
Pin punch
3KS Plus profile double cylinder for keyed-alike original systems