ABS attachment point Lock III steel
Anchor point ABS Lock X, steel, w. support tube
LOCK-III-STEEL-SUPPOR-TUB-(L3-ST-200-SR)
Register now and access more than 125,000 products
The stainless steel anchor point (diameter 16 mm) with DiBt National technical approval for steel substrates secures employees against falling in any direction of load (roof, wall, façade, overhead).
A 16 mm thick stainless steel support is the heart of the ABS-Lock III-ST anchorage system The securing device can be loaded in any direction, secures up to 3 people for working at height and can be supplied without overhang on request.
The anchor point is designed for installation on supporting steel surfaces. It secures your employees in industrial halls, on crane runways and on roof surfaces.
Do you want to use the anchor point as a component in a safety harness system? No problem! ABS-Lock III-ST is suitable as an intermediate holder, but can also be equipped with a support tube, thus functioning as a curve or corner support.
t
Datasheets(X)
- DIN EN 795:2012, A + DIN CEN/TS 16415:2013
- With and without overhang
- Incl. fastening material
- With support tube as end and corner post in rope systems
Insert the securing device through the previously drilled hole and lock it with the supplied nut.
The thread of the attachment point is simply inserted through a suitable drill hole and then secured with the jam nut (in scope of delivery).
Material | Stainless steel |
Rod length | 200 mm |
EN standard | 795 |
Suitable for use in the following materials | Steel |
Type description | L3-ST-200-SR |
Height | 200 mm |
Colour | Stainless steel coloured |
Surface | Stainless steel FINISH |
Last viewed
Hercules S3 safety boots
Cylindrical pin, hardened DIN 6325, steel, plain
3KS Plus profile double cylinder For keyed alike profile cylinders in original equipment
GEFU® thread-rolling screw With Taptite 2000® thread, hexagon head with collar and hexalobular drive (TXplus)
Water squeegee With replaceable sponge rubber cassette
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, A4-80 stainless steel, plain
Stud with threaded end ≈ 2d DIN 835, steel 10.9, zinc flake, silver (ZFSHL)
Cut protection glove Ejendals TEGERA® 430
Work dungarees
Work dungarees