ABS attachment point Lock X steel
Anchor point ABS Lock X, steel
LOCK-X-STEEL-(LX-ST-300)-300MM
Register now and access more than 125,000 products
The base plate (200 x 200 mm) of the securing device ABS-Lock X-ST is secured through supporting steel girders with 4 stainless steel screws and nuts. Mounted in this way, the stainless steel attachment point (diameter 16 mm) serves as a fall arrest system or restraint system for a maximum of 3 of your employees in work areas with a risk of falling.
At the heart of the anchoring device is the plastic-deformable stainless steel support. Made of special steel, the support deforms when a suspended person falls and converts the leverage forces into lifting forces that can be absorbed well by the mounting surface. The power conversion ensures a reduced load.
Datasheets(X)
- Observe the mounting specifications of the abZ (Z-14.9-688)
- DIN EN 795:2012, A + DIN CEN/TS 16415:2013
- Incl. stainless steel mounting material
- With support tube as end and corner post in safety harness systems
Secure the base plate (200 x 200 mm) of this stainless steel attachment point (diameter 16 mm) with 4 stainless steel screws through supporting steel surfaces. The securing device is approved by the German Institute for Construction Technology (DIBt), the required screws and jam nuts are always supplied.
Material | Stainless steel |
Rod length | 300 mm |
EN standard | 795 |
Suitable for use in the following materials | Steel |
Type description | LX-ST-300 |
Height | 300 mm |
Colour | Stainless steel coloured |
Surface | Stainless steel FINISH |