ABS attachment point Lock X steel with support tube
Anchor point ABS Lock X SR for steel
LOCK-X-STEE-(LX-SR-ST-500)-SUP-TUB-500MM
Register now and access more than 125,000 products
Do you need a single anchor point with 400, 700 or 1000 mm overhang?
No problem with the ABS-Lock X-SR-ST.
The securing device is available as standard in increments of 100 mm in lengths from 300 to 1000 mm. Because the anchoring system is equipped with a welded support tube and is secured by steel, it is immensely powerful and holds 3 falling people at the same time.
The reinforced support of the ABS-Lock X-SR-ST is mounted on a stainless steel base plate and is therefore ideally suited for use as a supporting element in safety harness systems. The base plate is secured by 4 screws and nuts through steel sub-constructions and easily withstands the pre-tension in safety harness systems. Thanks to the variable support height, you can plan the safety harness system very flexibly according to your needs.
Datasheets(X)
- Observe the mounting specifications of the abZ (Z-14.9-688)
- DIN EN 795:2012, A + DIN CEN/TS 16415:2017
- Base plate + welded support tube
- Incl. stainless steel mounting material
This DIBt-approved stainless steel attachment point with base plate (150 x 150 mm) is secured through steel surfaces. With the welded support tube (diameter 42 mm), when used as a system support, the securing device easily withstands the pre-tension of a safety harness system. Supplied with mounting kit.
Material | Stainless steel |
Rod length | 500 mm |
EN standard | 795 |
Suitable for use in the following materials | Steel |
Type description | LX-SR-ST-500 |
Height | 500 mm |
Colour | Stainless steel coloured |
Surface | Stainless steel FINISH |
Last viewed
Hexagonal bolt with shank DIN 931, steel 8.8, zinc-plated, blue passivated (A2K)
Clamping pin/clamping sleeve, slotted, heavy-duty design ISO 8752 spring steel plain
Conical countersink HSS Ruko DIN 335 plain form D
Split pin ISO 1234 A2 stainless steel
Lithium button cell 3 V
H26 plastic roller
Y-shaped push-in fitting
FKM 80 Shore O-ring ISO 3601-1
TIME-SERT® UNC threaded bushing
wSafe® 4000 pneumatic safety coupling With comfort connection