ABS sleeve extension for 16-type support
ABS sleeve extension for 16-type support
SEALING EXTENSION(ZU-V-16-300) 16/300 MM
Register now and access more than 125,000 products
The heat-shrink tubing must be shortened as necessary on site, and is also suitable for supports/anchor points. Available in 3 lengths (300, 600 or 1200 mm).
Used to extend the ABS LockSeal sealing cuffs e. g. for use on inverted roofs.
Datasheets(X)
- Extension for ABS LockSeal sealing cuffs
- For Ø 16 and 42 mm supports
- 3 lengths (300, 600 or 1200 mm)
- Can be shortened as required
A heat source (e.g. a hot air gun) is required to shrink the tubing.
Product weight (per item) | 31.8 g |
Material | Plastic |
Last viewed
Threaded fitting DIN 976-1 (shape A) with standard metric ISO thread, zinc-plated steel 4.8, blue passivated
Hexagon nut, heavy-duty design, inch
System insert foam for ORSY® system case 8.4.5
90° angled cutting ring fitting ISO 8434-1, stainless steel 1.4571
Twist drill bit HSCo DIN 340 type RN OXIDE
Adapter shaft for MBS HW cylinder saws
Face shield, accessories uvex hard hat
Hexagon head bolt with thread up to head ISO 4017, A2-50 stainless steel, plain
Hex head screw with shank ISO 4014, steel 8.8, zinc-plated, blue passivated (A2K)
Hexagonal nut with flange and clamping piece (all-metal) according to MBN standard