ASME B18.2.1 steel GR2 hot-dip galvanised
ASME B18.2.1 steel GR2 hot-dip galvanised
SCR-HCS-GR2-(HDG)-5/8_11X7 1/2
Register now and access more than 125,000 products
Datasheets(X)
Nominal diameter (d1) | 5/8 in |
Length (l1) | 7 1/2 in |
Thread type | UNC |
External drive (s1) | WS15/16 |
Material | Steel |
Property class | GR2 |
Surface | Hot dip galvanized |
Width across flats | 15/16 inch |
Last viewed
Hex head screw with thread up to head DIN 933, steel 8.8U, hot-dip galvanised (hdg)
Countersunk screw with hexagon socket head
Metric ratchet combination wrench Flexible ratchet head with POWERDRIV®
Cylindrical pin, unhardened with oval points DIN 7, plain steel (9 SMnPb 28 k or St 50 K), unhardened, tolerance class m6
Stainless steel base
ABILIT wood damping set For wooden doors, for closing softly and quietly
3/8" socket wrench insert For external TX screws, short
Safety goggles uvex sportstyle 9193
FLEXEN® pipe insulation S2 2 m section
HPC Speedcut 4.0 Inox end mill, extra long XL, optional, four blades, uneven angle of twist gradient, HB shank