ASSY^®plus FT combination timber screw

Hardened steel, blue passivated (A3K), combi head, AW drive, end mill, full thread, drill bit tip

Connects the wood instead of splitting it

Advantages

• Ideal for mounting steel elements (predominantly stressed with shear loads) on wood


• Lower number of screws thanks to high resistance to extraction and shear


• Ideal fit in round holes thanks to hexagonal combi head with integrated shank expansion


• Reduced metal formats and wooden cross sections due to very short edge distances (as with pre-drilling)


• Easier joining thanks to permitted positioning holes


• Suitable for universal use thanks to screw-in angle 0°–90°


• Approval for hardwood, KERTO/LVL, cross laminated timber and other wooden materials


• Application in utilisation class 1 and 2 in line with EN 1995:2013

Combi head

• With reinforced shaft neck for high power transmission and a precise fit

AW drive – more power

• Optimum transmission of forces


• Excellent fit, rapid finding, no wobbling


• Screw settles securely, virtually no unscrewing of bit

thread

• Symmetrical full thread for high load-bearing capacity.


• Plastic non-friction coating: Enables easy screwing in and reduces the screw-in torque

Drill tip

• Extremely short permitted edge distances e.g. 3xd - d = 8 mm - 60 mm carrier


• No pre-drilling required

Material

• High-strength steel for high breaking torque

Surface

• Blue passivated, A3K, Cr III, min. 8 µm

ETA-11/0190

• The requirements of the European Technical Approval must be observed.


• The load capacity of the transport anchor in conjunction with the ASSYplus FT COMBI screw (dia. 12 mm) must be checked in accordance with the test report/expert report before each transport operation and must be verified separately.