AT 48 RD automatic door seal
Door seal, automatic AT 48 RD
DRSEAL-AT48-(HS-RD)-L960MM
Register now and access more than 125,000 products
Material: Aluminium rail, high-quality silicone sealing strip
Seals against noise, draughts and smoke
Automatic compensation on uneven floor
Door to floor distance up to 20 mm
The door seal can be shortened by 125 mm on the opposite side of the actuating pin
Easy to mount with mounting bracket
No need to remove seal during planing work
Small groove depth (30 mm)
For wooden frame pressure plate, hammer the centre of the pressure point in the frame or cover
For lift adjustment, turn the actuation pin using hexagon socket SW 3
Sound insulation values:
- 7 mm air gap: 48 dB
- 20 mm air gap: 42 dB
The door seal must not jam in the groove. We recommend groove size 30.5 x 13.1 mm.
Groove position as far as possible from the pivot
Specified dimensions not binding. Subject to technical changes!
Datasheets(X)
Last viewed
Sweat band For the back of the head
Bucket hook For flanged ladders
Cupboard rail, round, welded
Twist drill bit HSCo DIN 340 type RN OXIDE
Double open-end wrench, ultra-thin
VARIFIX®profile foot for system 41 Power Lock
Handle for system case
Paint tray With drain-off area
Promotion film production/alteration costs
Nail anchor W-NA-K With nail head