ATO resettable fuse For continuous operation (permanent installation) and fault finding (diagnostics)
Resettable fuse ATO release lever
FLBLDEFSE-FSEAUTM-ATO-DIAG-10A
Register now and access more than 125,000 products
Thermal trip switch with colour-coded trip lever and black reset switch
Easy to reset by hand
using black reset switch
No costly downtime
Eliminates need to change fuses in defective circuits
The reset button must not be blocked. Reset button and hand trigger may only be actuated in the de-energised state.
Datasheets(X)
Max. current | 10 A |
Colour | Red |
Max. nominal voltage | 28 V/DC |
Min./max. operating temperature | -40 to 85 °C |
Surface of the contacts | Tin plated |
Last viewed
Inside corner for LFK cable routing conduit
Work dungarees
O-ring, imperial NBR 70
Partitioning set For ORSY® system case 8.4.2
Ring wedge
Hexagonal bolt with thread up to the head ISO 4017, steel 10.9, zinc-plated, blue passivated (A2K)
EPS profile half cylinder for keyed alike profile cylinders with original equipment
Hexagonal bolt with flange in accordance with MBN standard
Tool assortment 37 pieces in system case
Warning and protection profile square/square For 90° angles