Abrasive flap disc Klingspor SMT 314 Extra
Lamella flap disc Klingspor SMT 314
FLPDISC-KLINGSPOR-322815-D125X22-G40
Register now and access more than 125,000 products
The SMT 314 mop disc has a 12° curve, making it the right tool for processing smaller areas such as edges or welding seams.
Another important aspect is the tool's long service life. It reduces the tool change frequency and thereby supports efficient, fluid work processes. The type of grit used on the grinding disc also contributes to this effect. The corundum grit is a self-sharpening material. Pieces of grit break off during the grinding process, continuously revealing new sharp edges. The base of the mop disc is a fibreglass backing plate. The material is particularly strong yet sufficiently flexible to remain stable under heavy loads. It also ensures optimal power transmission to the workpiece.
Datasheets(X)
Diameter (Ø) | 125 mm |
Drill hole | 22.23 mm |
Grid size | 40 |
Design | Domed |
Material of carrier disc | Glass fabric |
Max. rotation speed | 12200 rpm |
Material of abrasive medium | Corundum |
Last viewed
Hexagonal bolt with shank ISO 4014, steel 10.9, zinc-plated, blue passivated (A2K)
Round head screw with square neck DIN 603, steel 4.8, zinc-plated, blue passivated (A2K)
Screw tap Time-Sert, UNC thread
Closing sequence selector
Turned flat washer DIN 7989-2, A2 stainless steel, plain, for steel construction
Double cylinder S5 locking system
Low-cut safety shoes, S1
ISO insert holder with S clamping system for VC indexable inserts
Low-cut safety shoes, S3
CLIP-O-Flex® drawer cabinet with beechwood panel