Abrasive flap disc Klingspor SMT 325 Extra
Lamella flap disc Klingspor SMT 325
FLPDISC-KLINGSPOR-321658-D125X22-G80
Register now and access more than 125,000 products
The SMT 325 Extra abrasive mop disc is based on a robust, glass fibre-reinforced plastic plate. The self-sharpening alumina zirconia abrasive grain ensures a long service life when grinding steel or stainless steel. There is no risk of vitrification, even at low contact pressure. The removal rate is equally good on angle grinders in all performance categories. In its curved version, the mop disc allows spot-grinding work to be performed at a high removal rate. It is therefore very well-suited to grinding edges and smoothing welding seams. The straight version is primarily used for flat and surface grinding.
Datasheets(X)
Diameter (Ø) | 125 mm |
Drill hole | 22.23 mm |
Grid size | 80 |
Design | Straight |
Material of carrier disc | Plastic, glass fiber reinforced |
Max. rotation speed | 12200 rpm |
Material of abrasive medium | Zirconium conrundum |
Last viewed
Half round head safety screw with hexagon socket and pin Similar to ISO 7380-1, A2-070 stainless steel, plain
Classic trousers
Lock washer DIN 127, steel, mechanically applied zinc coating
Green Pin® BN shackle, curved
90° angled tube cable lug Standard (similar to DIN)
Hexagon head bolt with shank for pressure container construction (PED) ISO 4014, steel 25CrMo4, plain
Spring band clamp DIN 3021, shape A, W.TEC
Divider assortment Divider assortment with compartment rails and compartment dividers for system dimensions 8.8
Square plug-in torque wrench head Stahlwille 734
EPDM butyl indoor sealing tape, 0.8 mm