Abrasive flap disc Klingspor SMT 325 Extra
Lamella flap disc Klingspor SMT 325
FLPDISC-KLINGSPOR-351276-XLOCK-D125-G80
Register now and access more than 125,000 products
The SMT 325 Extra abrasive mop disc is based on a robust, glass fibre-reinforced plastic plate. The self-sharpening alumina zirconia abrasive grain ensures a long service life when grinding steel or stainless steel. There is no risk of vitrification, even at low contact pressure. The removal rate is equally good on angle grinders in all performance categories. In its curved version, the mop disc allows spot-grinding work to be performed at a high removal rate. It is therefore very well-suited to grinding edges and smoothing welding seams. The straight version is primarily used for flat and surface grinding.
Datasheets(X)
Diameter (Ø) | 125 mm |
Drill hole | 22.23 mm |
Grid size | 80 |
Design | Straight |
Material of carrier disc | Plastic, glass fiber reinforced |
Max. rotation speed | 12200 rpm |
Material of abrasive medium | Zirconium conrundum |
Last viewed
Replacement cassette For floor squeegee
Parking sensor cover Sensor Mask
Adjusting ring DIN 705A/916
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 10.9, plain
Type WX brad nail, zinc-plated steel, blue passivated (A2K)
Ladder clamping system
GEFU® thread-rolling screw With Taptite 2000® thread, flat head and hexalobular drive
Threaded fitting DIN 976-1 (shape A) with standard metric ISO thread, zinc-plated steel 4.8, blue passivated
Polyamide/cotton coarse-knit glove
Connecting technology