Abrasive flap disc Klingspor SMT 325 Extra
Lamella flap disc Klingspor SMT 325
FLPDISC-KLINGSPOR-351279-XLOCK-D115-G80
Register now and access more than 125,000 products
The SMT 325 Extra abrasive mop disc is based on a robust, glass fibre-reinforced plastic plate. The self-sharpening alumina zirconia abrasive grain ensures a long service life when grinding steel or stainless steel. There is no risk of vitrification, even at low contact pressure. The removal rate is equally good on angle grinders in all performance categories. In its curved version, the mop disc allows spot-grinding work to be performed at a high removal rate. It is therefore very well-suited to grinding edges and smoothing welding seams. The straight version is primarily used for flat and surface grinding.
Datasheets(X)
Diameter (Ø) | 115 mm |
Drill hole | 22.23 mm |
Grid size | 80 |
Design | Straight |
Material of carrier disc | Plastic, glass fiber reinforced |
Max. rotation speed | 13300 rpm |
Material of abrasive medium | Zirconium conrundum |
Last viewed
Connector, pneumatic
Akura 44 profile thumbturn cylinder
HSS Multi Performance TiAIN stepped twist drill bit
Oil filter wrench with 3/8" drive for Nissan, Mazda
Countersunk head screw with recessed head, H ISO 7046-1, steel 4.8, zinc-plated, blue passivated (A2K)
Cable grip with swivel
Nova Pro Scala H90 frame set
Hexagonal bolt with thread up to the head ISO 4017, steel 10.9, zinc-plated, blue passivated (A2K)
Hex head screw with shank ISO 4014, steel 8.8, zinc-plated, blue passivated (A2K)
Olive screw with AW drive and lathe centre