Abrasive flap disc Klingspor SMT 626 Supra
Lamella flap disc SMT 626 Klingspor
FLPDISC-KLINGSPOR-321698-D125X22-G80
Register now and access more than 125,000 products
The flaps of the SMT 626 Supra abrasive mop disc are arranged on a slight incline. Even in aggressive applications, this special 6° fin angle produces a homogeneous grinding finish.
Since the fins are loaded evenly, they also wear evenly. This contributes to a long service life. On this Klingspor Supra model, this is also ensured by the self-sharpening alumina zirconia abrasive grain and the strong fibreglass backing plate.
The curved version of the abrasive mop disc is also very well suited not only to deburring and chamfering work, but also to levelling and abrasive grinding. Klingspor offers the SMT 626 Supra in a variety of grit sizes for fine and coarse grinding work.
Datasheets(X)
Locksmithing, equipment engineering and container manufacturing
Diameter (Ø) | 125 mm |
Drill hole | 22.23 mm |
Grid size | 80 |
Design | Domed |
Material of carrier disc | Glass fabric |
Max. rotation speed | 12200 rpm |
Material of abrasive medium | Zirconium conrundum |
Last viewed
Hexagonal bolt with shank and fine thread
MS 5000 object turning knob With recessed handle
CERALINE grinding disc Longlife & Speed For steel and stainless steel
Hexagon socket set screw with ring cutter ISO 4029, A2 stainless steel, 21H, plain
Screw with flattened half round head with collar and hexagon socket ISO 7380-2, steel 10.9, zinc-plated, blue passivated (A2K)
NOMEX® shoelaces
Hexagon nut, low profile, inch
Bodywork pull clamp Mini
System box
90° connection piece For hard-to-reach lubrication and manifold points