Abrasive flap disc Klingspor SMT 636 Supra
Lamella flap disc Klingspor SMT 636
FLPDISC-KLINGSPOR-322826-D115X22-G40
Register now and access more than 125,000 products
Other outstanding features include cool grinding thanks to the multibond. There is no need to worry about clogging or vitrification when using this abrasive. These characteristics are as beloved by professional users as they are by hobbyists for processing edges. This is a special product that has been designed for demanding work and achieves outstanding results under a wide range of conditions.
Advantages:
- Multibond for particularly cool grinding
- Suitable for edge and surface processing
- No vitrification or clogging
Datasheets(X)
Diameter (Ø) | 115 mm |
Drill hole | 22.23 mm |
Grid size | 40 |
Design | Domed |
Material of carrier disc | Glass fabric |
Max. rotation speed | 1330 rpm |
Material of abrasive medium | Zirconium conrundum |
Last viewed
Slide hammer injector puller set
Concealed screw assortment 327 pieces in system case 4.4.1.
Hexagonal bolt with thread up to the head ISO 4017, steel 8.8, plain
Plastic expanding rivet without cap, with multiple slits
UV 50 sun protection spray
ORSY®BULL series 5 worktop
GEFU® thread-rolling screw With Taptite 2000® thread, flattened half round head with collar and hexalobular drive
Hook-and-loop fastener SuperSoft For wall and ceiling sander WSS 225-E Compact
3KS Plus profile thumbturn cylinder For keyed alike profile cylinders in original equipment
Warning and protection profile square/square For 90° angles