Abrasive fleece matting body For impressive surfaces, cleaning oxide coatings and removing discolouration
Sanding fleece matting body
MATBDY-FLC-G100-40X20X6MM
Register now and access more than 125,000 products
- At high rotation speeds, coarse grain acts finer, and at low speeds fine grain acts coarser
- Use tools with a low contact pressure; heavy contact pressure causes premature wear
- If there is insufficient chip removal, do not increase the contact pressure. Instead, use coarser grains
Datasheets(X)
Diameter x width x shaft diameter | 40 x 20 x 6 mm |
Max. rotation speed | 15000 1/min |
Max. recommended rotation speed | 7500 1/min |
Material to be processed | Forged steel, Malleable cast iron, Grey cast iron, C-steel, Deep-drawn steel, Steels bands, Injection-moulded zinc, Non-ferrous metal, Cr-Ni and other stainless steels, Wood |
Last viewed
Screw extractor
Closed-end blind rivet, dome head ISO 15976 dome head steel/steel
Ducting clamp Part 2 – Heavy series
System workshop trolley PRO 8.4
Locking pin
SNAP marker
WÜPOFAST® zinc-plated blue chipboard screw
ASSY®plus 4 TH glass strip screw Hardened zinc-plated steel partial thread 60° Top Head, white
Safety boots, S4
Work vest