Abrasive fleece matting body For impressive surfaces, cleaning oxide coatings and removing discolouration
Sanding fleece matting body
MATBDY-FLC-G100-40X30X6MM
Register now and access more than 125,000 products
- At high rotation speeds, coarse grain acts finer, and at low speeds fine grain acts coarser
- Use tools with a low contact pressure; heavy contact pressure causes premature wear
- If there is insufficient chip removal, do not increase the contact pressure. Instead, use coarser grains
Datasheets(X)
Diameter x width x shaft diameter | 40 x 30 x 6 mm |
Max. rotation speed | 12000 1/min |
Max. recommended rotation speed | 6000 1/min |
Material to be processed | Forged steel, Malleable cast iron, Grey cast iron, C-steel, Deep-drawn steel, Steels bands, Injection-moulded zinc, Non-ferrous metal, Cr-Ni and other stainless steels, Wood |
Last viewed
Cold fixed pipe clamp With external connecting tabs, without screws
Hexagon head sealing plug with collar DIN 910, steel, zinc-plated, blue passivated (A2K)
Hexagon socket screw-in nut, tapered thread DIN 906, steel, plain
Cetus S1P low-cut safety shoe
Japanese spatula, spring steel
3KS Plus profile thumbturn cylinder For keyed alike profile cylinders in original equipment
WÜPLAST® countersunk head screw with Z Phillips head WN 1413, steel 10.9, zinc-nickel-plated, black passivated (P3R)
Furniture glider with pin
Safety boots, S3
New Air S1P low-cut safety shoes