Abrasive fleece matting body
Sanding fleece matting body ZEBRA
MATBDY-FLC-280-FINE-60X40X6MM
ZEBRA
Register now and access more than 125,000 products
Quick and shoulder-free
Double-impregnated abrasive fleece achieves the required sanding pattern with quick and shoulder-free results.
Easy to assign fineness structure
Colour coding to prevent the different versions from being mixed up.
- At high rotation speeds, coarse grain acts finer, and at low speeds fine grain acts coarser
- Use tools with a low contact pressure; heavy contact pressure causes premature wear
- If there is insufficient chip removal, do not increase the contact pressure. Instead, use coarser grains
Datasheets(X)
Shadow-free matting, burnishing, polishing and for matching "pre-sanded" metal sheets, achieving impressive surfaces, cleaning oxide coatings and removing discolouration.
For forged steel, malleable iron, grey cast iron, carbon steel, deep drawing steel, steel strip, injection-moulded zinc, non-ferrous metals, Cr-Ni and other stainless steels, as well as wood.
Diameter x width x shaft diameter | 60 x 40 x 6 mm |
Design | Fine |
Colour | Green |
Max. rotation speed | 7000 rpm |
Max. recommended rotation speed | 5000 rpm |
Material to be processed | Forged steel |
Last viewed
Sealing plug W.TEC® COVER CAP WP 300 F Polyethylene, natural
Pan Head screw with hexalobular head ISO 14583, steel, strength class 8.8, zinc-nickel-plated, silver (ZNSHL)
Work jacket JN1122 men's zip-off softshell jacket
Centre-grooved dowel pins ISO 8742 steel plain
Hexagonal bolt with thread up to the head
Straight male fitting ISO 8434-1, zinc-nickel-plated steel, BSPP male thread with seal
Centre-grooved dowel pins ISO 8742 steel plain
Slotted raised countersunk head screw DIN 964, steel 4.8, plain
Storage box with cover
Hand cleaner starter set 13 pieces