Abrasive fleece matting body

Name: Abrasive fleece matting body
Brand: Würth
SKU: 0672305080

Sanding fleece matting body ZEBRA
MATBDY-FLC-80-EXCOARSE-50X25X6MM

Art.-no. 0672305080

EAN 4053479030609

All versions

Specification

Specially designed for processing stainless steel. Virtually shoulder-free matting and burnishing and for matching "pre-sanded" metal sheets. For effective surfaces, cleaning oxide coatings and removing discolouration.

Quick and shoulder-free

Double-impregnated abrasive fleece achieves the required sanding pattern with quick and shoulder-free results.

Easy to assign fineness structure

Colour coding to prevent the different versions from being mixed up.

Notice

At high rotation speeds, coarse grain acts finer, and at low speeds fine grain acts coarser

Use tools with a low contact pressure; heavy contact pressure causes premature wear

If there is insufficient chip removal, do not increase the contact pressure. Instead, use coarser grains

Application

Application area

Shadow-free matting, burnishing, polishing and for matching "pre-sanded" metal sheets, achieving impressive surfaces, cleaning oxide coatings and removing discolouration.

For forged steel, malleable iron, grey cast iron, carbon steel, deep drawing steel, steel strip, injection-moulded zinc, non-ferrous metals, Cr-Ni and other stainless steels, as well as wood.

Technical information

Diameter x width x shaft diameter	50 x 25 x 6 mm
Design	Extra-coarse
Colour	Orange
Max. rotation speed	8000 rpm
Max. recommended rotation speed	6000 rpm
Material to be processed	Forged steel, Malleable cast iron, Grey cast iron, C-steel, Deep-drawn steel, Steels bands, Injection-moulded zinc, Non-ferrous metal, Cr-Ni and other stainless steels, Wood