Accessories, hammers Halder hammer insert Series 3203
Impact insert 3203 for Simplex s/f hammer Halder
IMPINRT-3203.050-TPEMID-D50
Register now and access more than 125,000 products
The SIMPLEX hammer insert TPE-mid is a thermoplastic elastomer and is a medium-hard insert with a hardness of approx. 90 Shore A (comparable with the hardness of the rubber composition insert Series 3202). Compared to the conventional rubber hammer, this grey insert does not leave behind any unwanted black abrasion marks. It is available in sizes D30 mm to D60 mm.
Datasheets(X)
For sensitive materials, setting natural stones, dry walling, furniture construction, laying tiles/panels, paving work, setting masonry/stairs, window/door construction, joinery
Material | Thermoplastic elastomer |
Diameter | 50 mm |
Last viewed
Work jacket
Twist drill bit HSCo DIN 338 Type RN MFD VARIO
Heat-shrink end cap
Hexagon socket threaded plug with collar Stainless steel 1.4571 with FKM sealing ring
U-bend standard Chrome-plated
Hexagonal bolt
Drawer ORSY®Flex
Occupational shoes
Coiled clmpng pin, hvy-duty design, inch
EPS profile double cylinder