Accessories, hammers Halder hammer insert Series 3508
Impact insert 3508 f.Supercraft s/f hammer Halder
INSERT-HALDER-3508.025-NYLON-D25
Register now and access more than 125,000 products
The nylon inserts for SUPERCRAFT soft-face hammers (series 3508) are very hard with a hardness of approx. 73 shore D. These white polyamide inserts offer excellent impact properties and guarantee maximum strength with outstanding durability. They are made of extruded, extremely homogeneous material. Compared to injection-moulded plastic inserts, they are therefore much more wear-resistant and stronger. They do not shatter even at temperatures below freezing. They can withstand the high impact forces of recoil-free soft-face hammers. In addition, they are resistant to oil and grease and are also used in the SUPERCRAFT sledgehammers, punches and mallets.
Datasheets(X)
Material | Nylon (polyamide) |
Diameter | 25 mm |
Last viewed
ASME B18.21.1 steel zinc-plated
Cylindrical pin, unhardened with oval points DIN 7, plain steel (9 SMnPb 28 k or St 50 K), unhardened, tolerance class m6
Soft-face hammer Halder SIMPLEX soft-face hammer Series 3123
Structure for workstation with CLIP-O-FLEX rails and frame for attachments
Knob cylinder 3KS
Crimp cable lug fork shape
Hexalobular screw with flattened half round head DIN 34805-1, TX drive, A2-070 stainless steel, plain
Cylinder tapping screw, shape C with slot DIN 7971, steel, zinc-plated, blue passivated (A2K), shape C
Aspen softshell jacket
Pipe fastening clamp DIN 3016, shape D, A2 stainless steel, EPDM, BASIC-Line