Accessories, hammers Halder hammer insert for punch Series 3508
Impact insert 3508 for punches Halder
IMPINRT-3508.010-NYLON-D10
Register now and access more than 125,000 products
The nylon inserts for SUPERCRAFT soft-face hammers (series 3508) are very hard with a hardness of approx. 73 shore D. These white polyamide inserts offer excellent impact properties and guarantee maximum strength with outstanding durability. They are made of extruded, extremely homogeneous material. Compared to injection-moulded plastic inserts, they are therefore much more wear-resistant and stronger. They do not shatter even at temperatures below freezing. They can withstand the high impact forces of recoil-free soft-face hammers. In addition, they are resistant to oil and grease and are also used in the SUPERCRAFT sledgehammers, punches and mallets.
Datasheets(X)
Material | Nylon (polyamide) |
Last viewed
Retrofit step For wooden runged stepladders/hybrid ladders
Countersunk screw with hexagon socket, galvanised ISO 10642, steel 10.9, zinc-plated, blue passivated (A2K)
Hexagonal bolt with shank for pressure container construction ISO 4014, steel 5.6, plain
Countersunk screw with hexagon socket head ISO 10642, steel 10.9, plain
Frame Nova Pro Scala H250 For H250 high extension
Turnbuckle sleeve, open form DIN 1480 (open shape), steel S235JR, hot-dip galvanised (hdg)
Pan head tapping screw, shape C with Z recessed head ISO 7049, A2 stainless steel, shape C (with tip)
Plug-in connector, wood/wood
Setting tool For Fixanchor W-FAZ-IG
Hex head screw with shank ISO 4014, steel 8.8, zinc-plated, blue passivated (A2K)