Acrylic filler 2C HS - FILR-HS-2C-4LTR - 1

Acrylic filler 2C HS - FILR-HS-2C-4LTR - 2

Acrylic filler 2C HS

Name: Acrylic filler 2C HS
Brand: Würth
SKU: 5866102104

Acrylic filler 2C HS
FILR-HS-2C-4LTR

Art.-no. 5866102104

EAN 4047376454927

All versions

Similar products

Prices for customers after login

Acrylic filler 2C HS

Art.-no. 5866102104

Prices for customers after login

Quantity

x 1 pcs

Exclusively for trade customers

Login/Register
Call customer service:

Fast-drying, high-solid acrylic filler with outstanding stability for high coat thicknesses (up to 300 µm).

Outstanding stability (no drop-in)

Dries very quickly

Excellent wet-on-wet application (no intermediate sanding)

High coat thickness

Excellent to sand

High degree of rust protection thanks to anti-corrosive pigments

Solids content of base material: 73.4%

Can be painted with all commercially available top-coat paint systems

Cannot be covered

Notice

The surface must have the correct pre-treatment depending on the surface. Only enter the colour code (e.g. FC 0006). Information such as the RAL number or text such as "RAL 5010, please" is recognised by the system as incorrect. Permissible maximum VOC content of product category 2 (e) of the German Ordinance on Solvent-Based Paints and Lacquers (ChemVOC FarbV.): 540 g/l. Max. VOC content: 488 g/l.

Application conditions: +10°C and above and up to 75 % relative humidity

The usage instructions are recommendations based on the tests we have conducted and are based on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Würth Catalogue

Datasheets(X)

Safety data sheet

Certificates/ Documents

Application area

Either as compact filler or thick-film filler. Spot repair is also possible without sunken spots and edges forming. Substrates: Hardened old paint coats New components with factory primer Filled surfaces For slightly uneven surfaces (high degree of filling strength) Not suitable for powder coatings Available colours: FC 0002 = beige FC 0006 = light grey

Instructions

Application tools: Paint spray gun, nozzle size at least 1.4 mm

Chemical basis	Two-component acrylic
Contents	4 l
Min. dust-drying time	10 min
Can be varnished after	5 h
Density	1.663 g/cm³
Density conditions	at 20°C
Min. yield (area)	5 m²
Shelf life from production	36 Month
Max. yield (area)	6 m²
VOC concentration (CH)	428.5 g/l
Max. permissible VOC concentration	540 g/l
Max. VOC concentration	488 g/l
Conditions for permissible VOC concentration	Product category 2(e)
Conditions for VOC concentration	ChemVOCFarb

Suitable glove:

Product

Description

Chemical protective glove, Butyl

Description:

Permeation level: 4

Gas-tight and resistant to exhaust gases produced by combustion processes

Nitrile chemical protective glove Long, heavy-duty design

Description:

Permeation level: 1

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Measured breakthrough time

Permeation level

< 10 min

≥ 10 min

≥ 30 min

≥ 60 min

≥ 120 min

≥ 240 min

≥ 480 min

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.