Welcome to Würth Aerospace Solutions For trade customers only

Acrylic thinner For 2-component acrylic products and 1-component thick coat lacquers

Acrylic thinner
THINNER-ACRYLIC-NORMAL-5LTR

Art.-no. 08234000
EAN 4024835195195

Prices for customers after login
Acrylic thinner For 2-component acrylic products and 1-component thick coat lacquers

Art.-no. 08234000

Prices for customers after login
Quantity
PU
x 1 pcs

Exclusively for trade customers

Register now and access more than 125,000 products

To dilute or to adjust the viscosity of 2-component top coats and 2-component clear coats for painting.

The usage instructions are recommendations based on the tests we have conducted and based on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Datasheets(X)

Safety data sheet

Certificates/ Documents

 | 

 | 

Application area

For all 2-component acrylic products as well as 1-component universal primer and 1-component thick coat lacquer

Instructions

Add the thinner to the paint in the required quantity. Note the mixture ratios of the individual products.

Contents

5 l

Container

Tinplate canister

Chemical basis

Xylol

Smell/fragrance

Aromatic

Colour

Colourless

Min. flashing point

25 °C

Density

0.875 g/cm³

Conditions to maintain shelf life from production

cool and dry storage area, no exposure to sunlight, 15°C to 25°C

Bio-degradable

Yes

Shelf life from production

24 Month

AOX-free

Yes

Suitable glove:
 
Product
Description
Nitrile chemical protective glove With cotton velour finish inside
Nitrile chemical protective glove With cotton velour finish inside
Description:
Permeation level: 3
Nitrile chemical protective glove Long, heavy-duty design
Nitrile chemical protective glove Long, heavy-duty design
Description:
Permeation level: 3
Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.
Measured breakthrough time
Permeation level
< 10 min
0
≥ 10 min
1
≥ 30 min
2
≥ 60 min
3
≥ 120 min
4
≥ 240 min
5
≥ 480 min
6

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information