Acrylic thinner, short For 2-component acrylic products and 1-component thick coat lacquers

Name: Acrylic thinner, short For 2-component acrylic products and 1-component thick coat lacquers
Brand: Würth
SKU: 08234001

Acrylic thinner, fast acting
THINNER-ACRYLIC-FAST-5LTR

Art.-no. 08234001

EAN 4024835195201

All versions

Similar products

Prices for customers after login

Acrylic thinner, short For 2-component acrylic products and 1-component thick coat lacquers

Art.-no. 08234001

Prices for customers after login

Quantity

x 1 pcs

Exclusively for trade customers

Login/Register
Call customer service:

For quicker drying times for paintwork and in cold weather

Notice

Note the mixture ratios of the individual products.

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications as well as storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by the provision of this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee the consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Würth Catalogue

Datasheets(X)

Safety data sheet

Certificates/ Documents

Application area

For all 2-component acrylic products as well as 1-component universal primer.

Contents	5 l
Container	Tinplate canister
Smell/fragrance	Aromatic
Colour	Colourless
Min. flashing point	24 °C
Density	0.87 g/cm³
Conditions to maintain shelf life from production	cool and dry storage area, no exposure to sunlight, 15°C to 25°C

Suitable glove:

Product

Description

Nitrile chemical protective glove With cotton velour finish inside

Description:

Permeation level: 2

Nitrile chemical protective glove Long, heavy-duty design

Description:

Permeation level: 3

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Measured breakthrough time

Permeation level

< 10 min

≥ 10 min

≥ 30 min

≥ 60 min

≥ 120 min

≥ 240 min

≥ 480 min

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.