Welcome to Würth Aerospace Solutions For trade customers only

Active Clean vehicle cleaner

Cleaner for vehicle Aktiv-Clean
CLNR-VEH-IN-(ACTIVE-CLEAN)-500ML

Art.-no. 0893472
EAN 4024835620819

Prices for customers after login
Active Clean vehicle cleaner

Art.-no. 0893472

Prices for customers after login
Quantity
PU

Exclusively for trade customers

Register now and access more than 125,000 products

Intensive foam cleaner for the entire vehicle interior

Micro-fine active foam (vacuum effect)


  • Foam remains on the surface and actively draws out the dirt when the foam bubbles burst

  • Outstanding dirt-dissolving power

  • Upholstery does not become wet, meaning drying times are shorter


Gentle on materials, suitable for all surfaces in the vehicle interior. The pre-determined breaking points of the airbag are not affected.



20x yield


  • 500 ml Active Clean equates to the yield of approx. 10 litres of liquid cleaning product

  • Saves money

Notice

Protect product from frost.

The usage instructions are recommendations based on the tests we have conducted and on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We ensure the consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Datasheets(X)

Safety data sheet

Certificates/ Documents

 | 

 | 

Instructions

Spray Active Clean onto a clean, dry cloth and wipe over the areas to be treated. Treat plastic parts with cockpit care afterwards. With fabrics and upholstery, let the foam take effect briefly and remove any soiling with a brush or sponge where necessary. With spots, work from the outside inwards. Then vacuum the upholstery.

Contents

500 ml

Container

Aerosol can

Smell/fragrance

Fruity

Colour

Colourless

Chemical basis

Water, soap and glycol

pH value

7.7

Min. flashing point

0 °C

Shelf life from production

24 Month

Bio-degradable

Yes

AOX-free

Yes

Silicone-free

Yes

Suitable glove:
 
Product
Description
Nitrile chemical protective glove With cotton velour finish inside
Nitrile chemical protective glove With cotton velour finish inside
Description:
Permeation level: 5
Nitrile chemical protective glove Long, heavy-duty design
Nitrile chemical protective glove Long, heavy-duty design
Description:
Permeation level: 6
Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.
Measured breakthrough time
Permeation level
< 10 min
0
≥ 10 min
1
≥ 30 min
2
≥ 60 min
3
≥ 120 min
4
≥ 240 min
5
≥ 480 min
6

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information