Welcome to Würth Aerospace Solutions For trade customers only
Active foam wash - CLNCONCEN-(ACTIVE CAR-SHAMP-FM)-25LTR Active foam wash - CLNCONCEN-(ACTIVE CAR-SHAMP-FM)-25LTR
Active foam wash - CLNCONCEN-(ACTIVE CAR-SHAMP-FM)-25LTR - 1
Active foam wash - CLNCONCEN-(ACTIVE CAR-SHAMP-FM)-25LTR - 2

Active foam wash

Cleaning concentrate, active-foam wash
CLNCONCEN-(ACTIVE CAR-SHAMP-FM)-25LTR

Art.-no. 08930252
EAN 4038898935728
All versions

Prices for customers after login
Active foam wash

Art.-no. 08930252

Prices for customers after login
Quantity
PU
x 1 pcs

Exclusively for trade customers

Register now and access more than 125,000 products

Intensive, highly concentrated foam cleaner for foam pre-treatment and wash of vehicles in car washes.

Highly concentrated active foam


  • The dirt is actively loosened from the vehicle surface as the foam bubbles burst

  • Outstanding cleaning power


Combination of special ingredients supports the brush sliding properties


  • Vehicle surfaces are protected

  • Recontamination of the brushes is prevented

  • Service life of the brushes is extended


No streaking when using preservers and drying aids


Can be used together with these aids in machines with water recycling systems.



Free of phosphate, AOX and silicone



pH value in the concentrate: 7.0



Easily biodegradable in accordance with OECD*. Does not compromise the effectiveness of light fluid separators.

Notice

Do not allow to dry! Store in a frost-free place!



*OECD = Organisation for Economic Cooperation and Development

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Würth Catalogue

Datasheets(X)

Safety data sheet

Certificates/ Documents

 | 

 | 

Application area

Highly foaming brush wash for passenger cars and commercial vehicles in automatic car washes.

Instructions

Depending on the device type, use as concentrate or mix with up to 9 parts water. To meet requirements, the foam thickness can be adjusted using the air feed and cleaning dispenser.


Consumption per vehicle: approx. 12–14 ml.

Contents

25 l

Product weight (per item)

26800 g

Chemical basis

Anionic tenside

Smell/fragrance

Characteristic

Container

Canister

Colour

Yellow

pH value

7

Density/conditions

1.015 g/cm³ / at 20°C

Shelf life from production

24 Month

AOX-free

Yes

Silicone-free

Yes

Phosphate-free

Yes

Additive article:
 
Product
Description
Quantity
PU
Price
/PU
Plastic tap DN 60 connection
Plastic tap DN 60 connection

TAP-(F.PLACANI-20/60LTR)

For plastic canisters with DN 60 connection for 20 L/25 L and 60 L
x 1 pcs
Hot protective wax
Hot protective wax

POLWAX-WASHSYS-HOT-25LTR

For protecting vehicles in self-service washing systems and in car washes with hot-wax sprayers.
x 1 pcs
Drying aid
Drying aid

DRYAID-CARWASHSYS-25LTR

Special desiccant for use in car washes with air blowers
x 1 pcs
Pre-spray cleaning concentrate
Pre-spray cleaning concentrate

CLNCONCEN-PREWASH-25LTR

Alkaline cleaning agent for pre-treating and removing stubborn dirt
x 1 pcs
The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.
The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076
Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units
The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.
In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).
Suitable glove:
 
Product
Description
Nitrile chemical protective glove With cotton velour finish inside
Nitrile chemical protective glove With cotton velour finish inside
Description:
Permeation level: 3
Nitrile chemical protective glove Long, heavy-duty design
Nitrile chemical protective glove Long, heavy-duty design
Description:
Permeation level: 4
Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.
Measured breakthrough time
Permeation level
< 10 min
0
≥ 10 min
1
≥ 30 min
2
≥ 60 min
3
≥ 120 min
4
≥ 240 min
5
≥ 480 min
6

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Würth Catalogue

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information
Show all product details