Welcome to Würth Aerospace Solutions For trade customers only

Adhesive EURABOND RC EXPRESS

Adhesive EURABOND RC EXPRESS
ASMBYADH-EURABOND-RC-EXPRESS-490ML

Art.-no. 0893710016
EAN 4062856627226

Prices for customers after login
Adhesive EURABOND RC EXPRESS

Art.-no. 0893710016

Prices for customers after login
Quantity
PU

Exclusively for trade customers

Register now and access more than 125,000 products

2-component adhesive for bonding glass edges and lips

May also have anti-intrusion properties


  • Adapted to the insulating glass edge seal and laminated glass films

  • High strength and elasticity


Easy and quick to apply


  • Quick to fully harden

  • Adhesion and strength builds up very quickly

  • Optimised pot time/curing ratio

  • Optimum balance of stability and flow behaviour

  • Excellent creep resistance


Good resistance to humidity, weathering and extreme temperatures



Good UV resistance



High modulus

Notice
  • The product must not come into contact with substances that react with isocyanate (e.g. alcohol, thinners, cleaners, silane-modified polymer or silicone by-products) before the product is fully cured. These would prevent complete curing.

  • Stress cracking: PMMA, ABS, PC and PS must only be glued when they are not under tension, otherwise stress cracks are likely to occur. Preliminary testing is required.

The usage instructions are recommendations based on the tests we have conducted and on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. If our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee the consistent quality of our products. We reserve the right to make technical changes and further develop products. Please observe the technical data sheet!

Product information

Certificates/ Documents

 | 

 | 

Application area

Especially suited for bonding insulating glass into window sashes as well as for bonding insulating glass units in door and window systems.


The processing and curing parameters are optimally adapted to applications with gluing machines. The adhesive connection improves the quality of the window and can also have anti-intrusion properties.

Instructions

The application surfaces must be clean, dry and free of grease. The IPA cleaner is best suited to PVC and wooden profiles. Only the acetone cleaner is suitable for aluminium profiles. For optimal adhesion, the EURABOND ACTIVATING CLEANER silicone must be used. In the case of PVC profiles, EURABOND PRIMER PVC must then be applied abrasively to the parts to be bonded using the cleaning sponge.



The mixer nozzle is placed onto the double cartridge, which is inserted into the AirFlow VBA 400A MR 2C pneumatic application gun. Do not use the first 2 cm for bonding.



For further information, please refer to the technical data sheet.

Contents

490 ml

Container

Double cartridge

Chemical basis

Silicone natural rubber

Colour

Black

Density

1.37 g/cm³

Shore hardness A/conditions

45 / in accordance with DIN EN ISO 10563

Density/conditions

1.37 g/cm³ / in accordance with DIN EN ISO 2811-1

Min. tensile strength

2.1 N/mm²

Min. combined tension and shear resistance

3 N/mm²

Conditions for tensile strength

in accordance with DIN EN ISO 527-1

Min. breaking elongation

230 %

Min./max. processing temperature

18 to 30 °C

Min./max. temperature resistance

-60 to 90 °C

Shelf life from production/conditions

12 Month / at 10°C to 25°C

Silicone-free

No

Isocyanate-free

Yes

Required accessory:
 
Product
Description
Quantity
PU
Price
/PU
AirFlow VBA 400A MR pneumatic application gun

CARTGUN-PN-2C-10:1

2C pneumatic gun for applying EURABOND RC EXPRESS
x 1 pcs
The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.
The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076
Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units
The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.
In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).
Additional accessory:
 
Product
Description
Quantity
PU
Price
/PU
Mixer nozzle for MAK 38 and EURABOND RC EXPRESS

STATMIXTUB-ADH-(MAK-38)

For methyl methacrylate adhesive MAK 38 in a 250 ml container and EURABOND RC EXPRESS in a 490 ml container
x 10 pcs
IPA isopropanol cleaner

UNICLNR-(IPA-CLEANER)-500ML

For universal use
Acetone cleaner for cleaning and degreasing parts of all kinds

ACETONCLNR-METCLNR-250ML

x 1 pcs
Primer EUROBOND PRIMER PVC

PRIM-EURABOND-PVC-1LTR

Adhesion promoter for PVC profiles with EURABOND adhesives
The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.
The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076
Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units
The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.
In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information