Adhesive EURABOND RC EXPRESS
Adhesive EURABOND RC EXPRESS
ASMBYADH-EURABOND-RC-EXPRESS-490ML
Register now and access more than 125,000 products
May also have anti-intrusion properties
- Adapted to the insulating glass edge seal and laminated glass films
- High strength and elasticity
Easy and quick to apply
- Quick to fully harden
- Adhesion and strength builds up very quickly
- Optimised pot time/curing ratio
- Optimum balance of stability and flow behaviour
- Excellent creep resistance
Good resistance to humidity, weathering and extreme temperatures
Good UV resistance
High modulus
- The product must not come into contact with substances that react with isocyanate (e.g. alcohol, thinners, cleaners, silane-modified polymer or silicone by-products) before the product is fully cured. These would prevent complete curing.
- Stress cracking: PMMA, ABS, PC and PS must only be glued when they are not under tension, otherwise stress cracks are likely to occur. Preliminary testing is required.
The usage instructions are recommendations based on the tests we have conducted and on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. If our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee the consistent quality of our products. We reserve the right to make technical changes and further develop products. Please observe the technical data sheet!
Especially suited for bonding insulating glass into window sashes as well as for bonding insulating glass units in door and window systems.
The processing and curing parameters are optimally adapted to applications with gluing machines. The adhesive connection improves the quality of the window and can also have anti-intrusion properties.
The application surfaces must be clean, dry and free of grease. The IPA cleaner is best suited to PVC and wooden profiles. Only the acetone cleaner is suitable for aluminium profiles. For optimal adhesion, the EURABOND ACTIVATING CLEANER silicone must be used. In the case of PVC profiles, EURABOND PRIMER PVC must then be applied abrasively to the parts to be bonded using the cleaning sponge.
The mixer nozzle is placed onto the double cartridge, which is inserted into the AirFlow VBA 400A MR 2C pneumatic application gun. Do not use the first 2 cm for bonding.
For further information, please refer to the technical data sheet.
Contents | 490 ml |
Container | Double cartridge |
Chemical basis | Silicone natural rubber |
Colour | Black |
Density | 1.37 g/cm³ |
Shore hardness A/conditions | 45 / in accordance with DIN EN ISO 10563 |
Density/conditions | 1.37 g/cm³ / in accordance with DIN EN ISO 2811-1 |
Min. tensile strength | 2.1 N/mm² |
Min. combined tension and shear resistance | 3 N/mm² |
Conditions for tensile strength | in accordance with DIN EN ISO 527-1 |
Min. breaking elongation | 230 % |
Min./max. processing temperature | 18 to 30 °C |
Min./max. temperature resistance | -60 to 90 °C |
Shelf life from production/conditions | 12 Month / at 10°C to 25°C |
Silicone-free | No |
Isocyanate-free | Yes |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!
Last viewed
Safety sandals S1
Timing tool set 19 pieces, for FCA Group 1.2-1.4-1.6, petrol
Countersunk screw with hexagon socket head ISO 10642, steel, strength class 8.8, zinc-nickel-plated, silver (ZNSHL)
Pressure strip
Number punches
Locating bolt
Socks
Screw-in tool For 8 x 30 USV screws
Sanding disc for exposed concrete starter set
Elevator tripod made from aluminium