Adjustable straight sealing cone reducer fitting ISO 8434-1, zinc-nickel-plated steel, cutting ring connection with o-ring
Adj. sealing cone reduction fitting ST with O-ring
TUBFITT-ISO8434-S-RDSW-ST-D12/D8
Register now and access more than 125,000 products
Datasheets(X)
 | |
Thread type x nominal diameter x pitch (T1) | M20 x 1.5 |
Thread type 2 x nominal diameter 2 x pitch 2 (T2) | M16 x 1.5 |
ISO | 8434 |
Nominal pressure PN | 630 |
Pipe diameter (D1) | 12 mm |
Diameter 2 (D2) | 5 mm |
Diameter 3 (D3) | 8 mm |
Width across flats (S1) | 19 mm |
Width across flats 2 (S2) | 24 mm |
Material | Steel |
Surface | Zinc nickel |
Length 2 (L2) | 30 mm |
Last viewed
Hexagon Socket Head Cap Screw with centre, with low head DIN 6912, steel 8.8, plain
Floor pad
Magnetic bit storage M-CUBE® cordless drill/driver
Scissor lift EXALIFT HDVL 25-100
Protective glove
AirKey KeyCredits
Set screw hex socket and flat point
Straight pin, unhardened DIN 7, A1 stainless steel, plain
VDE one-hand ratchet cutters EN 60900, IEC 900
Safety boots, S2