Adjustable straight sealing cone reducer fitting ISO 8434-1, zinc-nickel-plated steel, cutting ring connection with o-ring
Adj. sealing cone reduction fitting ST with O-ring
TUBFITT-ISO8434-S-RDSW-ST-D14/D12
Register now and access more than 125,000 products
Datasheets(X)
 | |
Thread type x nominal diameter x pitch (T1) | M22 x 1.5 |
Thread type 2 x nominal diameter 2 x pitch 2 (T2) | M20 x 1.5 |
ISO | 8434 |
Nominal pressure PN | 630 |
Pipe diameter (D1) | 14 mm |
Diameter 2 (D2) | 8 mm |
Diameter 3 (D3) | 12 mm |
Width across flats (S1) | 22 mm |
Width across flats 2 (S2) | 27 mm |
Material | Steel |
Surface | Zinc nickel |
Length 2 (L2) | 31 mm |
Last viewed
GEFU® thread-rolling screw With Taptite 2000® thread, flat head and hexalobular drive
System assortment 2.4.1, socket wrench 1/2 inch TX 17 pieces
Taper-grooved dowel pin ISO 8745 steel plain
Hexagon head bolt with shank and fine thread ISO 8765, steel 8.8, zinc-plated thick-film passivated (ZSML)
T-shaped push-in fitting with female thread
Hammer drill bit Plus Duo-S Vario
Low-cut safety shoes, S1
Work jumper JN040 sweatshirt
T-shaped cutting ring fitting ISO 8434-1, zinc-nickel-plated steel
Low-cut safety shoes, S1