Adjusting ring, type A
DIN 705 with DIN 913 plain steel, shape A
ADJRG-DIN705-A-DIN913-D20
Register now and access more than 125,000 products
Up to d1 = 70 mm with one set screw, over d1 = 70 mm with two set screws
 | |
Nominal diameter (d1) | 14 mm |
Outer diameter (d2) | 32 mm |
Width (b1) | 14 mm |
Thread type x diameter of set screw | M 6 mm |
Standards | DIN 705 |
Form | A |
Material | Steel |
Surface | Plain |
Number of set screws | 1 PCS |
RoHS-compliant | Yes |
Datasheets(X)
Last viewed
Blind rivet, open, with break mandrel and flat head ISO 15981, dome head, aluminium/aluminium
Straight partition plug connector
pias® drilling screw, raised countersunk head with AW drive
Clamping pin/clamping sleeve ISO 13337 spring steel plain
Safety boots, S2
Plastic multi-purpose anchor SHARK® Pro
Slotted flat-head screw DIN 85, A2-70 stainless steel, plain
Countersunk rivet
SNAP marker
Longlife & Speed Forstner bit
