Aerated concrete anchor W-PA

Name: Aerated concrete anchor W-PA
Brand: Würth
SKU: 0905720012

Aerated concrete anchor, W-PA type i
ANC-(W-PA/I)-(A2K)-M12X62

Art.-no. 0905720012

EAN 4011231852678

All versions

Prices for customers after login

Aerated concrete anchor W-PA

Art.-no. 0905720012

Prices for customers after login

Quantity

x 25 pcs

Exclusively for trade customers

Login/Register
Call customer service:

Specification

Heavy-duty anchor with internal thread (type I) for autoclaved aerated concrete. With construction product approval. Zinc-plated steel

High permissible loads for maximum safety

Quick anchor insertion — minimal installation costs

Immediate load-bearing capacity — no waiting

The positive locking anchoring is largely free of expansion pressure and is achieved without expensive and complicated undercutting tools.

Assembly with and without tools possible

Mechanical application with special tool for SDS mount also possible — uses only the impact action of the hammer drill (min. 3 kg).

Proof of Performance

Z-21.1-1983 General technical approval for: tension zone (cracked aerated concrete) and compression zone (non-cracked aerated concrete); lightweight ceiling cladding and suspended ceilings in accordance with DIN 18168-1:1981-10 in reinforced roof and ceiling panels, and for structurally comparable anchorages (see technical approval for maximum load)

Fire resistance: F90, F120 (M6–M12)

Notice

The anchors may only be fixed in unplastered, uncoated masonry walls

Knock in conical threaded bolt with setting tool without predrilling until flush

Attach expansion sleeve with slots forward

Knock in expansion sleeve with setting tool until flush

Tighten threaded sleeve with screwdriver

Mount component, apply torque

Z-21.1-1983 General technical approval for: tension zone (cracked aerated concrete) and compression zone (non-cracked aerated concrete); lightweight ceiling cladding and suspended ceilings in accordance with DIN 18168-1:1981-10 in reinforced roof and ceiling panels, and for structurally comparable anchorages (see technical approval for maximum load)

Fire resistance: F90, F120 (M6–M12)

Application

Application area

Heavy-duty anchor for non-reinforced aerated concrete, strength classes PB2, PB4 and PB6, and in reinforced aerated concrete, strength classes P 3.3 and P 4.4

Suitable for attaching metal structures, metal profiles, suspended ceilings, plumbing pipes, ventilation lines, base plates, brackets, railings, grilles, machinery, wooden structures, beams, purlins, supports etc. (see Anchor technology for industries)

For anchoring with primarily static loads

Use for components in dry, enclosed areas

Not suitable for wet rooms with an atmosphere containing chlorine (public swimming pools etc.)

Technical information

Anchor diameter	12 mm
Embedding depth (h s)	80 mm
Min./max. screw-in depth	12-18 mm
Material	Steel
Surface	Zinc plated
Hole diameter in component (d Bau)	14 mm
Tightening torque (T t)	8 Nm

Anchor diameter [mm], conical bolt			M6	M8	M10	M12
Admissible load Tensile, shear, diagonal tensile force under any angle (zinc-plated steel Zn)	Compressive zone (uncracked autoclaved aerated concrete)	F_adm[kN] PB2	0,40	0,40	0,60	0,60
	Compressive zone (uncracked autoclaved aerated concrete)	F_adm[kN] PB4	0,80	0,80	1,20	1,20
	Tensile zone (cracked autoclaved aerated concrete)	F_adm [kN] P3.3	0,60	0,60	0,80	0,80
	Tensile zone (cracked autoclaved aerated concrete)	F_adm [kN] P4.4	0,80	0,80	1,20	1,20
Ceiling applications in cracked autoclaved aerated concrete in tensile zone range of roof and ceiling panels		F_adm [kN] P3.3	0,60	0,60	0,80	0,80
		F_adm [kN] P4.4	0,80	0,80	1,20	1,20
Anchor applications when using pairs of anchors (per pair)		F_adm [kN] P3.3	0,60	0,60	0,80	0,80
Anchor applications when using pairs of anchors (per pair)		F_adm [kN] P4.4	0,80	0,80	1,20	1,20
Admissible bending moments (type i) zinc-plated steel Zn		M_adm [Nm]	4,35	10,70	21,40	37,40
Fire resistance rating
Anchoring light ceiling coverings and joist constructions (DIN 18168): Admissible load per anchor in autoclaved aerated concrete of strength class ≥ P3.3		Admissible F [kN] - F 90	0,35	0,45	0,80	0,80
		Admissible F [kN] - F 120	0,30	0,35	0,75	0,75
Anchoring façade cladding:¹⁾ Admissible load per anchor in autoclaved aerated concrete of strength class ≥ PB2, PP2 and ≥ P3.3		Admissible F [kN] - F 90	0,35	0,45	0,80	0,80
		Admissible F [kN] - F 120	0,30	0,35	0,75	0,75
¹⁾ It must be possible to redistribute the load to at least one adjacent fixing point.

Spacing	a ≥ [mm]	100	100	100	100
Edge distance	a_r ≥ [mm]	150	150	150	150
Tightening torque	M_D[Nm]	3	5	8	8
Embedment depth (Type A / Type i)	h_S [mm]	70/70	70/70	70/80	-/80
Minimum member thickness	d ≥ [mm]	175	175	175	175
Nominal drill diameter	d_drill [mm]	do not pre-drill	do not pre-drill	do not pre-drill	do not pre-drill
Hole diameter in the member (type A/type i)	d_constr ≤ [mm]	7/7	9/9	12/12	-/14

Documents/CAD data

Product information

Würth Catalogue

Datasheets(X)

CAD data (available after login)

Certificates/ Documents

Accessory

Required accessory:

Product

Description

Quantity

Price
/PU

Setting tool For manual installation

STGTL-(EWP10I/12I)-ANC-(W-PAIM10/M12)

Art.-no. 090579 013

For aerated concrete anchor W-PA type i

x 1 pcs

The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.

The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).