Aluminium paste AL 1100

Name: Aluminium paste AL 1100
Brand: Würth
SKU: 08931101

Alu paste AL 1100
PAST-ALU-(ANTISEIZE-AL1100)-TUBE-100G

Art.-no. 08931101

EAN 4011231832960

All versions

Prices for customers after login

Aluminium paste AL 1100

Art.-no. 08931101

Prices for customers after login

Quantity

Exclusively for trade customers

Login/Register
Call customer service:

Highly adhesive lubricant resistant to temperatures and high pressure

High-performance anti-seize aluminium/copper-based lubricant

Prevents burning on and seizing, cold welding, wear, corrosion, frictional corrosion

Resistant to water, weak acids and bases

Notice

Do not apply to painted surfaces.

The brush-in-cap can is the perfect wheel hub paste.

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and carry out further development.

Product information

Würth Catalogue

Datasheets(X)

Safety data sheet

Certificates/ Documents

Application area

The high-temperature resistant lubricant is suitable for lubricating the rear side of disc brake shoes (prevents squeaking), threaded assemblies (exhaust manifold screws, spark plug threads etc.), bearings, fulcrums, joints, sliding surfaces etc. Prevents caking of solid seals and can be used as contact protection on inert-gas welding gun nozzles, batteries and terminal posts.

Instructions

The surfaces must be thoroughly cleaned and free of dust and lubricant residues. Shake the spray can well before use. Spray evenly at a distance of approx. 20 to 30 cm. When using a tube or spray can, apply the material evenly to the surface to be treated using a spatula or brush.

Container	Tube
Contents	110 ml
Weight of content	100 g
Min./max. temperature conditions	-80 to 1100 °C
Shelf life from production	36 Month
Colour	Silver coloured
Density	1.1 g/cm³
Smell/fragrance	Oil
Chemical basis	Mineral oil
Kinematic oil basis viscosity	7 mm²/s
Conditions for viscosity of oil basis	at 40°C
Silicone-free	Yes
Acid-free	Yes
Resin-free	Yes
AOX-free	Yes
Resistance against	Weak lyes, Acid

Suitable glove:

Product

Description

Nitrile chemical protective glove With cotton velour finish inside

Description:

Permeation level: 5

Nitrile chemical protective glove Long, heavy-duty design

Description:

Permeation level: 6

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Measured breakthrough time

Permeation level

< 10 min

≥ 10 min

≥ 30 min

≥ 60 min

≥ 120 min

≥ 240 min

≥ 480 min

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.