Amo<SUP>® </SUP>III 7.5 type 3 window frame screw Half round head - SCR-PANHD-RW30-(A2K)-7,5X82

Amo<SUP>® </SUP>III 7.5 type 3 window frame screw Half round head - SCR-PANHD-RW30-(A2K)-7,5X82 - 1

Amo<SUP>® </SUP>III 7.5 type 3 window frame screw Half round head - SCR-PANHD-RW30-(A2K)-7,5X82 - 2

Amo<SUP>® </SUP>III 7.5 type 3 window frame screw Half round head - SCR-PANHD-RW30-(A2K)-7,5X82 - 3

Amo^®III 7.5 type 3 window frame screw Half round head

Name: Amo ® III 7.5 type 3 window frame screw Half round head
Brand: Würth
SKU: 023493082

Amo III type 3 steel zinc-plated RW 30
SCR-PANHD-RW30-(A2K)-7,5X82
AMO III

Art.-no. 023493082

EAN 4038898142782

All versions

Similar products

Prices for customers after login

Amo^®III 7.5 type 3 window frame screw Half round head

Art.-no. 023493082

Prices for customers after login

Quantity

x 200 pcs

Exclusively for trade customers

Login/Register
Call customer service:

For fastening windows in concrete and solid block masonry. With large pan head, lies cleanly on the frame and can be optimally concealed with cover caps. Zinc-plated steel, blue passivated, RW 30 drive

Positive-locking, removable anchorage with no expansion pressure

Load-bearing function is retained, even under thermal load

Tested fire resistance duration of 120 minutes

Time saving – no anchor necessary

Short installation times, as no tools are required for insertion

AW drive for longer bit service life, improved power transmission and no ejection forces

Through-hole mounting

Immediate load-bearing capacity – no waiting after insertion

Positive locking for high load-bearing capacity

Removable

Virtually no expansion forces on insertion

Proof of Performance

Fire protection test report no. 3174/0649-2 dated 12 January 2000

Test of suitability for attaching a flood-proof window in accordance with ift directive FE-07/1 conducted by the ift Rosenheim Institute. Test report no. 202 31790 dated 17 May 2006

Test of a fastener: Evaluation of test results for practical use in window installation by the ift Rosenheim Institute. Test report no. 23511241/2 dated 13 February 1990

Test of suitability for attaching a window to a brick masonry building structure conducted by ift Rosenheim. Test report no. 50922462 dated 11 October 2000

Notice

It is important to check that the components are correctly installed for the specific construction conditions (e.g. weight of window casement, surface properties, hole pattern in the brick). Fall-proof glazing as specified in the German technical rules for safety glazing (TRAV) or DIN 18008-4 may only be attached with the AMO Combi screw if appropriate individual approval has been obtained before installation starts.

Drill perforated and hollow blocks with a rotary drill (without hammer mechanism)

Align window frames using alignment clamps or Amo^® Bag

Screw length = frame width + gap + length of thread engagement (see also under 55.2 Amo^® III 11.5 mm)

Application area

Create the drill hole

Clean the drill hole

Align and affix the window frame

Screw in the screw

Press on cover cap

Fire protection test report no. 3174/0649-2 dated 12 January 2000

Test of suitability for attaching a flood-proof window in accordance with ift directive FE-07/1 conducted by the ift Rosenheim Institute. Test report no. 202 31790 dated 17 May 2006

Test of a fastener: Evaluation of test results for practical use in window installation by the ift Rosenheim Institute. Test report no. 23511241/2 dated 13 February 1990

Test of suitability for attaching a window to a brick masonry building structure conducted by ift Rosenheim. Test report no. 50922462 dated 11 October 2000

Product information

Würth Catalogue

Datasheets(X)

CAD data (available after login)

Certificates/ Documents

Application area

Tension-free spaced installation for wooden, plastic and aluminium window frames

Frame coupling

For attaching window shackles, pivot anchors and knock-in claw fasteners (short version)

Thanks to the large flat head, the head sits cleanly against the window profile, thereby offering advantages when using cover caps

Instructions

Guidelines for planning and executing the installation of windows and house doors, 2020 edition

Art. no. 5995000000:

The fixture must safely transfer all standard forces affecting the window to the structure and the foundation. The total load must therefore be calculated from e.g. the window load, wind load and live load (see DIN 1055). The currently applicable building regulations stipulate that buildings and their components must be planned in such a way that they do not endanger human life and health or pose a risk to public safety. Attachment of the windows must also comply with this criterion.

When securing window walls compliant with the former DIN 18056 standard or elements with a surface area in excess of 9 m2 and fall-proof glazing as specified in the German technical rules for safety glazing (TRAV) or DIN 18008-4, the following must be observed

The DIN 18056 standard applied to window walls with a minimum surface area of 9 m² and a minimum side length of 2 m on the shortest side. Anchors with construction product approval, European technical approval or with individual approval should be used for this application. Similarly, only anchors with construction product approval, European technical approval or with individual approval must be used to attach fall-proof glazing as specified in the German technical rules for safety glazing (TRAV) or DIN 18008-4.


Length (l)	82 mm
Thread diameter (d)	7.5 mm
Material	Steel
Surface	Zinc plated
Head type	Button head
Head diameter (d(h/k))	12.5 mm
Internal drive	RW30
Thread type	Metric thread
Shape of tip	Tip

F60 [kN]	0,50	0,50	0,50
F90 [in kN]	0,50	0,50	0,50
F120 [kN]	0,50	0,50	0,50
Performance data
Anchor type			Type 1	Type 2	Type 3
Fire resistance duration Concrete strength class Minimum C20/25 and at most C50/60	Centred tensile load	F30 [kN]	0,80	–	0,80
		F60 [kN]	0,55	–	0,55
		F90 [kN]	0,45	–	0,45
		F120 [kN]	0,40	–	0,40
	Transverse or diagonal pull up to 30°	F30 [kN]	0,50	0,50	0,50

Window frame	6,2
Drill hole depth		h₁ [mm]	Screw-in depth + 10 mm + any existing plaster layer
Installation parameters
Minimum Edge spacing	Concrete	c_min [mm]	50
Minimum Edge spacing	Sand-lime brick, solid brick, pumice, Lightweight concrete, softwood	c_min [mm]	60
Minimum Screw-in depth	Concrete	h_nom,min [mm]	30
	Sand-lime brick, solid brick		50
	Pumice, lightweight concrete, softwood		60
Drill hole diameter	Concrete	d₀ [mm]	6,5
	Sand-lime brick, solid brick, pumice, Light concrete		6,0
	Softwood		No pre-drilling required

Additional accessory:

Product

Description

Quantity

Price
/PU

Overlapping cover cap, for hexalobular socket and AW drive

CAP-FL-R9010-PUREWHITE-D15

Art.-no. 0590790101

Suitable for all screws with TX and AW drives

x 500 pcs

Overlapping cover cap, for hexalobular socket and AW drive

CAP-FL-R8016-MAHOGANYBROWN-D15

Art.-no. 0590790111

Suitable for all screws with TX and AW drives

x 500 pcs

The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.

The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).