Anchor point ABS Lock DH04 Flat
Anchor point ABS Lock DH04, flat
ROOFHOOK-DH04-(DH04-VA-F-A)
Register now and access more than 125,000 products
Stainless steel roof safety hook, tested in accordance with EN 517 B, approved in all load directions (also towards the barge board). Incl. fastening material. Approved for 3 people. Narrow straight design, e.g. for slate and plain tile claddings.
Also available in the colours red and anthracite.
Datasheets(X)
The straight design of the ABS-Lock® DH04 means that it can be used as a roof hook and ladder hook, e.g. on slate roofs with continuous boarding. Mounting takes place through the boarding directly into the rafter with 2 special screws.
Material | Stainless steel |
Rod length | 0 mm |
EN standard | 517-B |
Suitable for use in the following materials | Wood |
Type description | DH04-VA-F-A |
Height | 0 mm |
Colour | Anthracite grey RAL 7016 |
Surface | Stainless steel FINISH |
Last viewed
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 8.8, zinc-plated, blue passivated (A2K)
Dry wall screw Top Head
Replacement spray head For spray cans
Hexagonal bolt with thread up to head ISO 4017, steel strength class 8.8, zinc-nickel-plated, silver (ZNSHL)
Screw with flattened half round head and hexagon socket
Type SKD coupling sleeve With hexagon socket and flange
One-way runner For REDOSLIDE Z40-G sliding door fitting set
Oval rosette Aluminium, inner PZ
WÜPOFAST® black oxide chipboard screw Steel, browned, full thread, raised countersunk head, PZ
Hexagonal bolt with shank and fine thread DIN 960, steel, strength class 10.9, zinc-nickel-plated, transparent passivated (P3E)